ᵀᴴᴱMOTOWORKS 3-Button Handlebar Control - Series Two Preorder
We are back with a second version of our popular 3-Button Handlebar Controls - this time with improved ergonomics and aesthetics. We've placed all three buttons in a wide parallel arc around the bar to follow the thumb's natural motion. We believe this is the most comfortable - not to mention best looking - momentary push-button handlebar control out there.
These will be available by December 2020 but we are accepting preorders now.
Please note that the item in the images is a raw aluminum prototype that has not been through our finishing process. Final products will be available in a black or clear anodized finish similar to our other offerings.
The MotoWorks 3 Button Handlebar Controls are anodized for a durable finish and place 3 momentary push buttons in easy reach of your thumb. Momentary buttons are ON when depressed and OFF when released, so these controls are a perfect marriage to Motogadget's m-unit or similar control unit, or paired with a relay.
Inner Diameter: 22mm (7/8 in)
Outer Dimensions: 63 mm x 58mm (2 1/2 in x 2 1/4in)
Width: 19 mm (3/4 in)
Housing: Anodized Finish in Black or Clear
Buttons: 3 Momentary Push Buttons.
Material: CNC Machined Billet 6061 Aluminium
Optional pre-wire with 3-ft leads ready for install
Two M5 Stainless Steel Mounting Screws
Secure clamping for 22mm & 7/8 in. Diameter Handlebars.
Push-buttons are vibration and water resistant (IP65).
Motogadget m-unit compatible.
Made in the USA by ᵀᴴᴱMOTOWORKS
ᵀᴴᴱMOTOWORKS RFID Ignition Lock
Want to clean up the area around your handlebars? What if one wave of the hand could be used to start your bike? What if one key could be used for all your bikes?
With its ultra-simple design, The Motoworks RFID Ignition Lock is perfect for decluttering motorcycle cockpits by providing clean, modern looks and performance. It replaces your ignition keyswitch with a smaller, touchless unit that is just as secure.
Using RFID technology, this electronic device provides a contactless method of switching a vehicle on and off. Simply place the included RFID key near the RFID Ignition Lock and the vehicle unlocks and is ready to start. Pass the same key over the lock again to switch the vehicle off. The RFID Ignition Lock can even be hidden behind a non-metallic surface for the cleanest install possible.
With no moving parts and an identification code unique to each key, the RFID Ignition Lock is both reliable and secure. One RFID Key can also be programmed for use with multiple ignition locks too, so one key could be used to start all the bikes in your garage.
Note: Modification to the vehicle's electrical system is required for install.
Curious about how to install the RFID Ignition Lock? Check out the video below!
ᵀᴴᴱMOTOWORKS Electronic Gauge
COMING SOON: As seen on our custom bikes like the Suzuki GT380 and Ducati MD1 & MD2: An electronic speedometer and tachometer combination with many additional features.
Designed and manufactured entirely in-house, this gauge provides all the functions we wanted in one clean, modern package. A large tachometer takes up the main gauge face, with several small LED warning lights and a graphic LCD display to show the remaining features.
Speedometer (mph or kmh)
A/B trip meter
Oil Warning Light
Turn Signal indicator
0-60 best time (or 0-100kmh)
Programmable service interval alerts
and many more!
Preorder is available, ship date will be Q1 2021.
ᵀᴴᴱMOTOWORKS Rear Sets
ᵀᴴᴱMOTOWORKS Motorcycle Adjustable Rearsets
ᵀᴴᴱMOTOWORKS Motorcycle Rear Sets are universal fit and CNC machined from lightweight billet aluminum. Each set features a one-piece design where the shifter and brake lever are integrated with the foot pegs requiring only 1 bolt (M10 1.25) for the Rear Set assembly installation. Teflon washers make the shift and brake lever actuation virtually effortless. These MotoWorks foot controls are incredibly lightweight and weigh a mere 366 grams as a set. This is a universal fit part and may or may not fit without modification. Fabrication may be required for proper mounting.
CNC machined from 6061-T6 billet aluminum
Adjustable actuators (12-degree increments) to suit your riding style
Knurled foot pegs to keep your foot where it belongs
Designed and manufactured with pride in the USA by The MotoWorks
ᵀᴴᴱMOTOWORKS Quad-Axis Mirror
There's a million different mirrors out there. But we were never happy with the options. Some looked cool but they didn't have the features we wanted, or even worse, it was the other way around. So we decided to make our own, designed and manufactured in the USA.
With four degrees of adjustment, the Quad Axis Mirror can be positioned for the perfect rear view. Swing the arm outwards for a clear view, or swing it inwards when parking in a tight space. Adjustability allows the mirror to be placed correctly in nearly every situation.
The Quad Axis Mirror is designed to mount to a 7/8" or 22mm handlebar using only one bolt. Adjustments are quick and simple, and the convex mirror only moves when re-positioned by the user.
The Quad Axis Mirror is CNC-machined from aluminum and finished with a durable anodized coating.
ᵀᴴᴱMOTOWORKS Micro Turn Signals
Featuring an all-metal housing and two high-power lensed LED lights per signal, The Motoworks Micro Turn Signals are both tough and bright. The aluminum bodies are cnc-machined and anodized for high-performance fit and finish that withstands abuse. High efficiency LEDs provide bright light while drawing minimal current.
Each turn signal is approximately 2" length x 5/8" height x 1/2" depth.
ᵀᴴᴱMOTOWORKS Gift Card
Want to pick up some motorcycle parts for someone but not sure what they're looking for? Gift cards are available for our webstore.
After purchase you will be supplied with a gift card code via email that can be used on our webstore during checkout.