Want to clean up the area around your handlebars? What if one wave of the hand could be used to start your bike? What if one key could be used for all your bikes?

With its ultra-simple design, The Motoworks RFID Ignition Lock is perfect for decluttering motorcycle cockpits by providing clean, modern looks and performance. It replaces your ignition keyswitch with a smaller, touchless unit that is just as secure.

Using RFID technology, this electronic device provides a contactless method of switching a vehicle on and off. Simply place the included RFID key near the RFID Ignition Lock and the vehicle unlocks and is ready to start. Pass the same key over the lock again to switch the vehicle off. The RFID Ignition Lock can even be hidden behind a non-metallic surface for the cleanest install possible.

With no moving parts and an identification code unique to each key, the RFID Ignition Lock is both reliable and secure. One RFID Key can also be programmed for use with multiple ignition locks too, so one key could be used to start all the bikes in your garage.

Note: Modification to the vehicle's electrical system is required for install.

Curious about how to install the RFID Ignition Lock? Check out the video below!

Sold Individually.

There's a million different mirrors out there. But we were never happy with the options. Some looked cool but they didn't have the features we wanted, or even worse, it was the other way around. So we decided to make our own, designed and manufactured in the USA.

With four degrees of adjustment, the Quad Axis Mirror can be positioned for the perfect rear view. Swing the arm outwards for a clear view, or swing it inwards when parking in a tight space. Adjustability allows the mirror to be placed correctly in nearly every situation.

The Quad Axis Mirror is designed to mount to a 7/8" or 22mm handlebar using only one bolt. Adjustments are quick and simple, and the convex mirror only moves when re-positioned by the user.

The Quad Axis Mirror is CNC-machined from aluminum and finished with a durable anodized coating.

 ᵀᴴᴱMOTOWORKS Motorcycle Adjustable Rearsets

ᵀᴴᴱMOTOWORKS Motorcycle Rear Sets are universal fit and CNC machined from lightweight billet aluminum. Each set features a one-piece design where the shifter and brake lever are integrated with the foot pegs requiring only 1 bolt (M10 1.25) for the Rear Set assembly installation. Teflon washers make the shift and brake lever actuation virtually effortless. These MotoWorks foot controls are incredibly lightweight and weigh a mere 366 grams as a set. This is a universal fit part and may or may not fit without modification. Fabrication may be required for proper mounting.

Features:

• CNC machined from 6061-T6 billet aluminum
• Adjustable actuators (12-degree increments) to suit your riding style
• Knurled foot pegs to keep your foot where it belongs
• Designed and manufactured with pride in the USA by The MotoWorks

This product serves as a DEPOSIT ONLY for a custom made-to-order spoked motorcycle wheel hub. As with any custom application, costs and production time will vary. 

The MotoWorks is now offering made-to-order front and rear spoked motorcycle wheel hubs. Replace your mag wheels with spoked wheels, change out your brake drum for discs, or build something custom for that fork or swingarm swap. 

We can design hubs for many motorcycle applications: single or dual disc brakes, and rear hubs for chain, belt or shaft drive bikes. Many finishing options are available.  We do not make automotive wheel hubs or conversion parts. 

We are back with a second version of our popular 3-Button Handlebar Controls - this time with improved ergonomics and aesthetics. We've placed all three buttons in a wide parallel arc around the bar to follow the thumb's natural motion. We believe this is the most comfortable - not to mention best looking - momentary push-button handlebar control out there. 

Sold Individually.

The MotoWorks 3 Button Handlebar Controls are anodized for a durable finish and place 3 momentary push buttons in easy reach of your thumb. Momentary buttons are ON when depressed and OFF when released, so these controls are a perfect marriage to Motogadget's m-unit or similar control unit, or paired with a relay.

• Inner Diameter: 22mm (7/8 in)
• Outer Dimensions: 63 mm x 58mm (2 1/2 in x 2 1/4in)
• Width: 19 mm (3/4 in)
• Housing: Anodized Finish in Black or Clear
• Buttons: 3 Momentary Push Buttons.
• Material: CNC Machined Billet 6061 Aluminium
• Optional pre-wire with 3-ft leads ready for install
• Two M5 Stainless Steel Mounting Screws
• Secure clamping for 22mm & 7/8 in. Diameter Handlebars. 
• Push-buttons are vibration and water resistant (IP65).
• Motogadget m-unit compatible.
• Made in the USA by ᵀᴴᴱMOTOWORKS

Clean up the back of your bike with ᵀᴴᴱMOTOWORKS Tail Tidy bracket. Our Tail Tidy is designed specifically for use with a high-powered LED taillight and our house-made Micro Turn Signals, though we also offer this bracket without turn signals so you can use your own!

Easily mounts to a flat surface with four bolts. Arrives as unfinished aluminum so you can paint to match your bike.

Did you know we make custom hydraulic brake and clutch lines for bikes, cars and more? Anyone who has changed their handlebars, altered their suspension, or installed aftermarket brake calipers knows that new brake and/or clutch lines are often required for safe operation.

Each brake line is unique to the application and is made-to-order, therefore we cannot provide a price via the website.

To place an order, drop us a line at info@themotoworks.com or at 1(585) 469-5521

We use low-profile BrakeQuip components and braided stainless steel hose for a discreet, performance-oriented installation. Fittings and hose length are chosen per application so we never need to use unsightly adapters that can leak. Each line is pressure tested to 3000 psi before install to ensure proper operation and performance.

Our lines are safe for use with DOT 3, 4, 5 and 5.1 brake fluids, as well as oil and many other fluids. The stainless braided hose is sheathed in a PVC jacket and is available in a black, smoke or stainless-steel color.

Featuring an all-metal housing and two high-power lensed LED lights per signal, The Motoworks Micro Turn Signals are both tough and bright. The aluminum bodies are cnc-machined and anodized for high-performance fit and finish that withstands abuse. High efficiency LEDs provide bright light while drawing minimal current.

Each turn signal is approximately 2" length x 5/8" height x 1/2" depth.

Want to pick up some motorcycle parts for someone but not sure what they're looking for? Gift cards are available for our webstore. 

After purchase you will be supplied with a gift card code via email that can be used on our webstore during checkout.

All gift card sales are final.

As seen on our custom bikes like the Suzuki GT380 and Ducati MD1 & MD2: An electronic speedometer and tachometer combination with many additional features.

Designed and manufactured entirely in-house, this gauge provides all the functions we wanted in one clean, modern package. A large tachometer takes up the main gauge face, with several small LED warning lights and a graphic LCD display to show the remaining features. 

Features:

• Speedometer (mph or kmh)
• Tachometer
• Odometer
• A/B trip meter
• Oil Temperature
• Oil Pressure
• Oil Warning Light
• Volt Meter
• Turn Signal indicator
• Neutral Light
• High Beam
• 0-60 best time (or 0-100kmh)
• Programmable service interval alerts
• and many more!