ᵀᴴᴱMOTOWORKS 3-Button Handlebar Control - Series Two
We are back with a second version of our popular 3-Button Handlebar Controls - this time with improved ergonomics and aesthetics. We've placed all three buttons in a wide parallel arc around the bar to follow the thumb's natural motion. We believe this is the most comfortable - not to mention best looking - momentary push-button handlebar control out there.
The MotoWorks 3 Button Handlebar Controls are anodized for a durable finish and place 3 momentary push buttons in easy reach of your thumb. Momentary buttons are ON when depressed and OFF when released, so these controls are a perfect marriage to Motogadget's m-unit or similar control unit, or paired with a relay.
Inner Diameter: 22mm (7/8 in)
Outer Dimensions: 63 mm x 58mm (2 1/2 in x 2 1/4in)
Width: 19 mm (3/4 in)
Housing: Anodized Finish in Black or Clear
Buttons: 3 Momentary Push Buttons.
Material: CNC Machined Billet 6061 Aluminium
Optional pre-wire with 3-ft leads ready for install
Two M5 Stainless Steel Mounting Screws
Secure clamping for 22mm & 7/8 in. Diameter Handlebars.
Push-buttons are vibration and water resistant (IP65).
Motogadget m-unit compatible.
Made in the USA by ᵀᴴᴱMOTOWORKS
ᵀᴴᴱMOTOWORKS Custom Wheel Hubs
This product serves as a DEPOSIT ONLY for a custom made-to-order wheel hub. As with any custom application, costs and production time will vary.
The MotoWorks is now offering made-to-order front and rear wheel hubs. Replace your mag wheels with spoked wheels, change out your brake drum for discs, or build something custom for that fork or swingarm swap.
We can design hubs for many applications: single or dual disc brakes, and rear hubs for chain, belt or shaft drive bikes. Many finishing options are available.
ᵀᴴᴱMOTOWORKS Micro Turn Signals
Featuring an all-metal housing and two high-power lensed LED lights per signal, The Motoworks Micro Turn Signals are both tough and bright. The aluminum bodies are cnc-machined and anodized for high-performance fit and finish that withstands abuse. High efficiency LEDs provide bright light while drawing minimal current.
Each turn signal is approximately 2" length x 5/8" height x 1/2" depth.
ᵀᴴᴱMOTOWORKS Quad-Axis Mirror
There's a million different mirrors out there. But we were never happy with the options. Some looked cool but they didn't have the features we wanted, or even worse, it was the other way around. So we decided to make our own, designed and manufactured in the USA.
With four degrees of adjustment, the Quad Axis Mirror can be positioned for the perfect rear view. Swing the arm outwards for a clear view, or swing it inwards when parking in a tight space. Adjustability allows the mirror to be placed correctly in nearly every situation.
The Quad Axis Mirror is designed to mount to a 7/8" or 22mm handlebar using only one bolt. Adjustments are quick and simple, and the convex mirror only moves when re-positioned by the user.
The Quad Axis Mirror is CNC-machined from aluminum and finished with a durable anodized coating.
ᵀᴴᴱMOTOWORKS RFID Ignition Lock
Want to clean up the area around your handlebars? What if one wave of the hand could be used to start your bike? What if one key could be used for all your bikes?
With its ultra-simple design, The Motoworks RFID Ignition Lock is perfect for decluttering motorcycle cockpits by providing clean, modern looks and performance. It replaces your ignition keyswitch with a smaller, touchless unit that is just as secure.
Using RFID technology, this electronic device provides a contactless method of switching a vehicle on and off. Simply place the included RFID key near the RFID Ignition Lock and the vehicle unlocks and is ready to start. Pass the same key over the lock again to switch the vehicle off. The RFID Ignition Lock can even be hidden behind a non-metallic surface for the cleanest install possible.
With no moving parts and an identification code unique to each key, the RFID Ignition Lock is both reliable and secure. One RFID Key can also be programmed for use with multiple ignition locks too, so one key could be used to start all the bikes in your garage.
Note: Modification to the vehicle's electrical system is required for install.
Curious about how to install the RFID Ignition Lock? Check out the video below!
ᵀᴴᴱMOTOWORKS Tail Tidy
Clean up the back of your bike with ᵀᴴᴱMOTOWORKS Tail Tidy bracket. Our Tail Tidy is designed specifically for use with a high-powered LED taillight and our house-made Micro Turn Signals, though we also offer this bracket without turn signals so you can use your own!
Easily mounts to a flat surface with four bolts. Arrives as unfinished aluminum so you can paint to match your bike.